EVENT

EVENT

EVENT Series Residential Type Heat Recovery Units are used in homes and small volume areas to provide fresh air and to exhaust polluted air.

Product Catalogue

User
Guide

Product Receipt

Certificate

Ecodesign

EVENT Series Residential Type Heat Recovery Units are used in homes and small volume areas to provide fresh air and to exhaust polluted air.
Supply and Exhaust Air Fans
The fans in heat recovery units are equipped with innovative Electronically Commutated EC motor technology. EC motors have higher efficiency and simple speed control than AC motors and connect the AC mains. Fan blades have high aerodynamic efficient backward curved design. Using the EC motors reduce the energy consumption and increase the energy efficiency of the unit. With EC Fans it is also possible to reduce maintenance costs as the fans are direct drive; free of belt and pulley.
Supply and Exhaust Air Filter
To increase indoor air quality and to protect the equipments used in unit, G class filters (according to EN 779 standard) are used for both exhaust and supply air streams. F class filters can be also used optionally in the unit. F class filters reduce the available static pressure of the unit for the nominal air
flow rate.
Casing
High corrosion resistive 200 gr/m² galvanize coated steel is used for the casing. The case of unit is painted by electrostatic powdered paint.
Non-flammable EPS modules are used for directing the air flow homogeneously. Density of EPS is 40 kg/m³.
By-Pass
Event units have by-pass ventilation as standard. During by-pass ventilation, no heat transfer occurs between exhaust and fresh air stream. In transition periods and at nights in summer, by-pass module helps to cool down (free-cooling) and heat up (free-heating) the building without any energy expense.
Heat Recovery Exchanger
EVENT Units heat recovery ventilation units have plastic counterflow, high efficient plate heat recovery exchangers. Plate heat recovery exchangers have plates that are produced improved surface areas to provide high efficiency and leakage free design. With the optimisation of exchanger heat transfer is increased and pressure drop is decreased.
Control System
ENECON PLUS control unit is developed for controlling of heat recovery units’ equipments, meeting the demands coming from the customers and is user-friendly designed. ENECON PLUS is capable of commanding the equipments in standard unit and optional accessories. ENECON PLUS Control unit can be performed the basic functions without any control panel, with Standard Panel can be also used more functional. Besides, the control unit can control the all functions via ModBus and switch on/off via BMS as optional. Alternatives different from ENECON PLUS controller are listed in “Control System” part.